Gadget Glamour

How to apply your iPhone skin

1) Make sure your device is clean and dust free.

2) Remove the back skin.

3) Start on this edge to ensure the skin lines up correctly with the camera hole, then firmly rub down working your finger from left to right.

4) Remove the front skin with clear application film still attached.

5) Line up the front skin with the long edge to ensure holes for screen, earpiece and home button line up.

6) Firmly rub down skin and then slowly & carefully remove the clear application film by pulling it back on itself.

7) Finally go to the product page on our website with your device, select your product, click wallpaper link, press and hold image until it says ‘save image’.

8) Go to Photos on your device, where the wallpaper will be and press ‘Use as Wallpaper’.

How to apply your iPad skin

1) Make sure your device is clean and dust free.

2) Lift the back skin from the lining paper and reset it with an inch of the sticker overlapping.

3) Now position the exposed sticky edge on your iPad, centralising top and bottom, 1mm in from the long edge.

4) Press with your finger to squeeze the air out from under the skin, moving from the centre out to sides for the best finish.

5) Flip the paper over along the line of where the skin is attached. Then remove paper exposing all of the adhesive.

6) Hold the skin with one hand whilst rubbing your finger from left to right to push the air out.

7) Remove the front skin with clear application film still attached.

8) Line up the front skin with the long edge to ensure holes for screen, earpiece and home button line up.

9) Firmly rub down skin and then slowly & carefully remove the clear application film by pulling it back on itself.

10) Finally go to the product page on our website with your device, select your product, click wallpaper link, press and hold image until it says ‘save image’.

11) Go to Photos on your device, where the wallpaper will be and press ‘Use as Wallpaper’.